Gridfinity Starter Bin Pack — 6 bins (STL / 3MF / STEP)
Digital 3D-print files — nothing ships.
Images are 3D visualizations, not photographs. Physical fit is untested.
Digital files only — no physical items ship. Gridfinity-compatible storage for standard-size trading cards: two graded-slab bins with an accessory pocket, two sleeved-card bins, optional lane spacers and tabbed index dividers. One purchase includes all 12 designs in STL, geometry-only 3MF and editable STEP, plus reproducible CadQuery source and a dimension sheet.
$11.99 USD for the full 12-design pack. Pairs with Binform's free Gridfinity toploader bin (separate download).
The 89.0 mm slab lane is sized for the widest standard holder we could source (SGC, 86.25 mm caliper measurement, +2.75 mm clearance) and also targets BGS (83.0, +6.0) and Card Saver I semi-rigid holders (84.14, +4.86). For PSA (80.26), CGC (≈80.0) and TAG (79.4) holders, add the 6 mm spacer for an 83.0 lane (about +2.7 to +3.6 mm). The 70.0 mm card lane fits a penny-sleeved standard card (66.7 mm, +3.3 mm). Holder sizes vary by generation — caliper yours and check the dimension sheet before printing. Lane-depth capacity (about 26 PSA-size or 19 BGS/SGC-size slabs in the 3×4) is a geometric estimate, not a tested count.
Bins print base-down, dividers and spacers flat, as supplied; designed without support-dependent features (standard Gridfinity foot chamfers and short 0.5 mm base bridges). Largest footprint 125.5 × 167.5 mm. Suggested starting point: PLA, 0.4 mm nozzle, 0.20 mm layers, 3 walls, 15% infill. Review in your slicer; 3MF is geometry, not a tuned printer profile. Fits standard 42 mm Gridfinity baseplates (baseplate not included).
All 12 CAD solids are valid; every STL/3MF is a watertight, consistently wound, single-body mesh; STEP files re-import with matching dimensions; lane widths were measured from the exported meshes. Not physically test-printed — physical fit is untested. No slicer was available on our build machine, so there are no print-time or filament figures. Images are 3D renders and CAD drawings, not photos; slabs and cards shown are plain schematic blocks. Not protective, archival or value-protection storage; no load, food-contact or child-safety claims.
PSA, Beckett/BGS, CGC, TAG, SGC, Cardboard Gold (Card Saver) and Ultra PRO are named only to describe target sizes; Binform is not affiliated with or endorsed by any of them. Gridfinity was created by Zack Freedman (MIT License); Binform is not affiliated with Zack Freedman or the Gridfinity project. These are original Binform designs.
Buyers may print the files for personal use, but may not share, resell, or redistribute the files or sell printed copies.
Contact support for download or file problems. We’ll provide a working replacement; if we can’t resolve the issue, we’ll refund the purchase. Change-of-mind refunds aren’t offered after download, except where required by law.
Customer support: binform55@gmail.com.
Free file + 20% off
A 1×1×3u scoop bin for small screws and bits. We’ll email the STL, 3MF, and STEP files, plus 20% off your first order. No purchase needed.
3D visualization — not a photo · Personal printing only
You can unsubscribe at any time using the link in our emails, or by emailing binform55@gmail.com. See our privacy policy.
Check your inbox for your free scoop bin and your 20% off code. If it doesn’t arrive in a few minutes, look in spam or email binform55@gmail.com.