3D render, not a photo: Binform 3x4 Gridfinity slab bin with schematic PSA-size slabs and a tabbed divider, beside a 2x4 card bin with penny-sleeved standard-size cards. Digital files only; physical fit untested.

Gridfinity Trading Card Storage Pack — Graded Slab & Sleeved Card Bins for Standard-Size Trading Cards (STL / 3MF / STEP)

$11.99
Skip to product information
3D render, not a photo: Binform 3x4 Gridfinity slab bin with schematic PSA-size slabs and a tabbed divider, beside a 2x4 card bin with penny-sleeved standard-size cards. Digital files only; physical fit untested.

Gridfinity Trading Card Storage Pack — Graded Slab & Sleeved Card Bins for Standard-Size Trading Cards (STL / 3MF / STEP)

$11.99

Digital file download · Personal-printing license · File won’t work? We replace it, or refund if we can’t fix it.

Images are 3D visualizations, not photographs. Physical fit is untested.

Digital files only — no physical items ship. Gridfinity-compatible storage for standard-size trading cards: two graded-slab bins with an accessory pocket, two sleeved-card bins, optional lane spacers and tabbed index dividers. One purchase includes all 12 designs in STL, geometry-only 3MF and editable STEP, plus reproducible CadQuery source and a dimension sheet.

$11.99 USD for the full 12-design pack. Pairs with Binform's free Gridfinity toploader bin (separate download).

What's included (mm)

  • Slab bin 3×4, 6u: 125.5 × 167.5 × 46.4 — slab lane 89.0 wide × 165.1 deep + 32.9 mm side pocket
  • Slab bin 3×2, 6u: 125.5 × 83.5 × 46.4 — slab lane 89.0 × 81.1 + side pocket
  • Card bin 2×4, 6u: 83.5 × 167.5 × 46.4 — card lane 70.0 wide × 165.1 deep
  • Card bin 2×2, 6u: 83.5 × 83.5 × 46.4 — card lane 70.0 × 81.1
  • Two lane spacers (164 and 80 long, 6.0 thick) that narrow the slab lane to 83.0
  • Six index dividers with left / center / right tabs: 68 × 106 × 1.6 (card lane) and 80 × 152 × 1.6 (slab lane)

Sized from published and measured holder sizes

The 89.0 mm slab lane is sized for the widest standard holder we could source (SGC, 86.25 mm caliper measurement, +2.75 mm clearance) and also targets BGS (83.0, +6.0) and Card Saver I semi-rigid holders (84.14, +4.86). For PSA (80.26), CGC (≈80.0) and TAG (79.4) holders, add the 6 mm spacer for an 83.0 lane (about +2.7 to +3.6 mm). The 70.0 mm card lane fits a penny-sleeved standard card (66.7 mm, +3.3 mm). Holder sizes vary by generation — caliper yours and check the dimension sheet before printing. Lane-depth capacity (about 26 PSA-size or 19 BGS/SGC-size slabs in the 3×4) is a geometric estimate, not a tested count.

Printing

Bins print base-down, dividers and spacers flat, as supplied; designed without support-dependent features (standard Gridfinity foot chamfers and short 0.5 mm base bridges). Largest footprint 125.5 × 167.5 mm. Suggested starting point: PLA, 0.4 mm nozzle, 0.20 mm layers, 3 walls, 15% infill. Review in your slicer; 3MF is geometry, not a tuned printer profile. Fits standard 42 mm Gridfinity baseplates (baseplate not included).

Honest validation limits

All 12 CAD solids are valid; every STL/3MF is a watertight, consistently wound, single-body mesh; STEP files re-import with matching dimensions; lane widths were measured from the exported meshes. Not physically test-printed — physical fit is untested. No slicer was available on our build machine, so there are no print-time or filament figures. Images are 3D renders and CAD drawings, not photos; slabs and cards shown are plain schematic blocks. Not protective, archival or value-protection storage; no load, food-contact or child-safety claims.

PSA, Beckett/BGS, CGC, TAG, SGC, Cardboard Gold (Card Saver) and Ultra PRO are named only to describe target sizes; Binform is not affiliated with or endorsed by any of them. Gridfinity was created by Zack Freedman (MIT License); Binform is not affiliated with Zack Freedman or the Gridfinity project. These are original Binform designs.

Personal-use license

Buyers may print the files for personal use, but may not share, resell, or redistribute the files or sell printed copies.

Refunds

Contact support for download or file problems. We’ll provide a working replacement; if we can’t resolve the issue, we’ll refund the purchase. Change-of-mind refunds aren’t offered after download, except where required by law.

Customer support: binform55@gmail.com.