Gridfinity trading card storage: lane sizes for toploaders, sleeved cards and graded slabs

Gridfinity bins sit on a 42 mm grid, and trading-card holders don't divide neatly into it. Here are the lane widths that work for the three things most collectors store: 3"×4" toploaders, penny-sleeved cards and graded slabs.

Quick reference

What you store Holder width Lane width Side play
Penny-sleeved standard card 66.7 mm 70.0 mm +3.3 mm
3"×4" toploader 76.2 mm (Ultra PRO listed) ~81–82 mm (2-unit bin) ~5 mm
PSA slab 80.26 mm 83.0 mm (with 6 mm spacer) +2.7 mm
BGS slab 83.0 mm 89.0 mm +6.0 mm
SGC slab 86.25 mm (caliper) 89.0 mm +2.75 mm

Holder sizes vary by generation and maker, so caliper yours before you print.

Toploaders

A 2-unit-wide bin is 84 mm outside, leaving roughly 81–82 mm inside: enough play to flip through 76.2 mm toploaders without binding. A 3-unit-deep bin (126 mm) lines them up front to back like files. Toploaders are 101.6 mm tall, so a 6u bin (about 46 mm) leaves most of each one exposed to grip.

Free file: I put these numbers into a free Gridfinity toploader bin on Printables (2×3 single lane and 4×3 two-lane).

Sleeved cards and graded slabs

Penny sleeves fit a 70 mm lane; a 2-unit bin carries one lane comfortably. Slabs are the tricky part: one 89 mm lane covers SGC, BGS and Card Saver I holders, and a 6 mm spacer narrows it to 83 mm for PSA, CGC and TAG so they don't lean.

If you'd rather not model it yourself, the Gridfinity Trading Card Storage Pack has slab bins, sleeved-card bins, lane spacers and tabbed index dividers (12 designs, STL / 3MF / STEP, $11.99).

Planning the whole drawer

Measure the inside of the drawer, divide by 42 mm and round down. The Gridfinity drawer size chart has the table from 8 to 24 inches. Want a free file to test your printer's fit first? Get the free scoop bin by email, plus 20% off your first order.

Honest note: Binform files are digital downloads only. Our images are 3D renders and the bins haven't been physically test-fit yet, so print one small bin first. Gridfinity is Zack Freedman's open standard; Binform isn't affiliated with him.